Car Diagnostic Tool

 This article show a guide on how to use setup/configure Insite 8.2.0 work with Nexiq usb link. Cummins INSITE 8.2.0 truck software is also compatible with Inline 5, Inline 6, DPA5, Nexiq and Xtruck data link adapters. Cummins Insite Related Contents: How to Update Cummins Insite Software for Win 7/Win 8 Original Cummins Insite 8.2.1.155 Installation Instructions Newest Cummins Insite 8.4.1 Free Download Preparation: Download INSITE 8.2.0 patch Cummins insite 8.2.0 lite version patch Cummins insite 8.2.0 pro version patch Main Procedures: Step 1:Install Nexiq Drivers Step 2:Install Insite 8.2.0 Step 3:Active INSITE 8.2.0 Step 1:Install Nexiq Drivers Run USB-Link_9.5.0.1 setup on desktop as Administrator Click Next to start install NEXIQ USB Link drivers Accept copyright notice Click Next Installing Microsoft Visual C++ 2005 Click Next to install Device Tester Setup Accept license agreement Tick Device Tester Install, click Next Install software on C:/Program Files/

Post on how to program 5th immo for audi A6L 2013 (with key) by Xtool x100 pad2 pro with KC100 adapter. The first one key is original and the remote is working, the second one is blank to be programmed. Youtube video: You must know: www.Autonumen.com is official site for Xtool x100 pad2 update online To have Xtool x100 pad2 at good price, highly recommend http://www.Autonumen.com . Guide in words with pictures: Tap “X100 pad2” on the screen. Tap “VW/Audi Skoda / Seat” Tap “4th/5th immobilizer system”. Have two options “4th immobilizer system” and “5th immobilizer system”, Audi A6L 2013 is 5th immobilizer system. It can’t indentify the VIN code because the ignition doesn’t turn on, just go to switch the ignition on. 5th immobilizer system function menu. 1). Read immokey. 2). Show security data Have 3 keys. 3) Make dealer key. Please plug the KC100 into tablet, press (OK) to continue. The KC100 adapter indicator turn blue means it powers on. Put the ori

 Use the Device Tester to test the connection between the USB-Link™ and the vehicle. At startup, the Device Tester checks for any NEXIQ drivers installed on the PC. -Download NEXIQ Product Driver here: NEXIQ Driver. Access the Device Tester from the Windows task-bar 1. Prepare your PC, and connect NEXIQ device to Diagnostic Port/Connector on unit. 2. Click Start and then select All Programs – NEXIQ – Device Tester and “USB-Link 2 Explorer”, or through shortcut “Device Tester” and “ USB-Link 2 Explorer” on desktop. USB-Link 3. Use the drop-down button in the “Device” box to select the appropriate device (for example: USB-Link). The Device box lists all the devices supported by the NEXIQ drivers installed on the PC. 4. Use the drop-down button in the “Protocol” box to select the appropriate protocol (for example: J1708). The Protocol box lists only the protocols supported by the device selected in the “Device” box. 5. Press the “Start Test” button. 6. The “Device Test